Otto Bock 4R84 Instructions For Use Manual page 10

For Use of 506G5 Set Screws
Allowable environmental conditions
Temperature range for use: -10 °C to +60 °C
Storage and transport conditions: -10 °C to +60 °C, 250 mbar to 1013 mbar, con­
densing
Acid resistance: salt water, chlorine water, soapsuds, perspiration, urine
Moisture: fresh water, salt water, chlorine water, soapsuds, steam
Allowable immersion depth: 3 m
Unallowable environmental conditions
Mechanical vibrations or impacts
Dust, sand, highly hygroscopic particles (e.g. talcum)
2.4 Service Life
In general, all modular adapters are tested by the manufacturer for 3 million
load cycles. Depending on the patient's level of activity, this corresponds to
a service life of 3 to 5 years.
3 Safety
3.1 Explanation of Warning Symbols
Warning regarding possible risks of accident or injury.
CAUTION
Warnings regarding possible technical damage.
NOTICE
3.2 General Safety Instructions
CAUTION
Using the product without following the instructions for use
Deteriorating health condition and damage to the product because of fail­
ure to follow the safety information
► Observe the safety information in these instructions for use.
► Make the patient aware of all safety instructions marked with "Inform
the patient".
CAUTION
Excessive strain on the product
Fall due to breakage of load-bearing components
► Use the prosthetic components according to the classification (see
section "Area of Application").
► Inform the patient.
10 | Ottobock