Explanation Of Symbols; Single Components; Instructions For Use - Otto Bock ROBO-WRIST Instructions For Use Manual

Explanation of Symbols

Warnings regarding possible risks of severe accident or injury.
WARNING
Warnings regarding possible risks of accident or injury.
CAUTION
Warnings regarding possible technical damage.
NOTICE
INFORMATION
INFORMATION
Please read these instructions for use carefully and pay special
attention to the safety instructions!

Single components

1.
1.1 Single components
For available single components refer to the catalogue.
1.2 Accessories
ROBO-WRIST
1011 - Ball Insert screwed to Terminal Device
1012 - The 2-part Titanium Adapter accessory in Figure 3 isdesigned
to protect the ROBO-WRIST interlinking system from
excessive strain and shock. It must be used when
hammering, performing heavy lifting or performing extreme
sports such as weight lifting, wrestling or rock climbing to
name a few. These accessories are not included and must
be ordered separately.
Description
2.
2.1 Indications for use
The 1001 ROBO-WRIST is to be used solely for the exoprosthetic fitting
of the upper extremities in combination with Otto Bock arm components.
2.2 Field of application
The 1001 ROBO-WRIST can be used in combination with an Otto Bock
Cable-Activated Hook, an All-Purpose Hook or an Otto Bock System
Hand. The 1001 ROBO-WRIST accepts standard fittings.
Additional information on the fitting/use.
19