Otto Bock ROBO-WRIST Instructions For Use Manual page 21

occurrence, the interlocking surfaces, Actuator, Actuator Pins and Ball
Nipple Race should immediately be inspected for damage.
Should damage have occurred to either of the 2 interlocking parts, due
to negligence by the patient, the cost of replacing the Actuator and/or
Pins or the Ball Nipple Race will have to be carried by the patient and
is not covered by the comprehensive 2-year ROBO-WRIST warranty.
NOTICE
Risk of corrosion. Prosthetic components must not be exposed to
corrosive elements such as fresh water, salt water, and acids.
Using this medical product in such environmental conditions will render
all claims against Otto Bock HealthCare null and void.
NOTICE
Damage caused by inappropriate environmental conditions.
Prosthetic components must not be subjected to intense smoke, dust,
vibrations, shocks, or high temperatures. Do not allow debris or liquids
to get into the prosthetic components. Failure to follow these instructions
can lead to malfunctioning and damage to the prosthesis.
NOTICE
Damage caused by improper cleaning agents. Do not use any ag-
gressive cleaning agents, since they could cause damage to bearings,
seals and plastic parts.
2.4 Function
The ROBO-WRIST is available in only one design. One size fits all.
Remove the ROBO-WRIST and one Ball Insert from the Shipping Box.
Refer to Figure 1 for an illustration of the function. Press the Ball Button
and insert the Ball Insert into the Ball. Twist slightly and push down
hard until the Insert clicks into the Ball.
Pushing the Actuating Button all the way in unlocks the ROBO-WRIST.
21