Network Setting - VTech VSP725 Administrator And Provisioning Manual

3. Provisioning
4. Reset to default
5. Restart phone

Network Setting

Use the Network setting menu to configure network-related settings for the phone.
NOTE: After you press
To use the Network setting menu:
1. From the Admin Settings menu, press  or  to highlight Network setting,
then press SELECT.
The Network setting menu appears.
2. Press  or  to highlight the desired option, then press SELECT:
 DHCP
 Set static IP
 VLAN ID
 Others (DNS and NTP servers).
To enable or disable DHCP:
1. From the Network setting menu, press  or  to highlight DHCP, then press
SELECT.
2. Press  or  to select Enabled or Disabled, then press Save.
DHCP is enabled by default, which means the deskset will get its IP address from the
network. When DHCP is disabled, you must enter a static IP address for the deskset.
NOTE: You must be familiar with TCP/IP principles and protocols to configure static
IP settings.
To set static IP for the deskset:
1. From the Network setting menu, press  or  to highlight Set static IP, and
then press SELECT.
If DHCP is disabled, the Set static IP menu appears. If DHCP is enabled, an
error message appears briefly before returning you to the Network setting menu.
VSP725 Administrator and Provisioning Manual
1. Server
2. Login
3. Password
Press SELECT to display a screen that allows you to reset
the phone to factory default settings.
Press SELECT to display a screen that allows you to restart
the phone.
Save for any of the network settings, the phone restarts.
14 Using the Phone Menu