Answering system settings
Default settings are indicated by asterisks (*).
Settings menu
Call screening
# of rings
Remote code
Msg alert tone
Recording time
Set number of rings
You can set the answering system to answer an incoming call after , 3, 4, or 6 rings;
or toll saver. If you choose toll saver, the answering system answers a call after rings
when you have new messages, or after 4 rings when you have no new messages.
.
Press MENU when the phone is not in use.
Scroll to Answering sys >> Press SELECT.
.
Scroll to Ans sys setup >> Press SELECT.
3.
4.
Scroll to # of rings >> Press SELECT.
Scroll to choose 2, 3, 4, 5, 6 or Toll saver >> Press SELECT.
.
Record your own announcement
You can use the preset announcement to answer calls, or replace it with your own
recorded announcement. It can be up to 0 seconds in length.
.
Press MENU when the phone is not in use.
Scroll to Answering sys >> Press SELECT three times.
.
The handset announces, "Record after the tone. Press 5 when you are done."
3.
After the tone, speak towards the handset microphone. Press 5 when done.
Answering system operation
Turn the answering system on or off
The answering system must be turned on to answer and record messages.
ANS ON on the telephone base to turn the built-in answering system
•
Press
on or off.
Message playback at the telephone base
/PLAY
Press
when the phone is not in use.
Options during playback:
•
Press q/VOL or p/VOL to adjust the speaker volume.
Press /SKIP to skip to the next message.
•
Press /REPEAT to repeat the playing message. Press /REPEAT twice to
•
listen to the previous message.
Press X/DELETE to delete the playing message. The system advances to the
•
next message.
•
Press
/STOP to stop.
Delete all messages at the telephone base
Press X/DELETE twice when the phone is not in use.
Call intercept
If you want to talk to the person whose message is being recorded, press
or
on the handset, or press
Expand your telephone system
You can add new handsets (DS6071, purchased separately) and new headset
(IS6100, purchased separately) to your telephone system. This telephone system
accommodates up to devices, including a maximum of two headsets.
For more details, refer to the user's manual that comes with your DS6071 new
handset and IS6100 new headset respectively.
Description
Set whether you hear the callers while they are
leaving messages to you.
Set the number of times the telephone rings
before the answering system answers.
Set a two-digit security code to access the
answering system remotely from any touch-tone
telephone.
Set to alert you when you have new messages.
Set the recording time for each incoming message. 3 minutes*;
on the headset.
Options
On*;
Off
4*; 3; 2;
Toll saver; 6; 5
19*
Off*;
On
2 minutes;
1 minute
/HOME