CipherLab CP60 Reference Manual page 146

CP60 Mobile Computer
AUTO PROFILE & LIST
When Auto Profile is activated, the Summit radio will attempt to associate to an access point
after a device startup or resume, and it will try out each profile in order until the radio
associates to an access point. The successful profile becomes the active profile and remains
active until one of the following occurs:
The device goes through suspension and resume, power-cycling, or restart, which
causes the radio to go through the automatic profile selection process once more.
Auto Profile is turned off and an active profile is manually selected on the SCU Main
window.
The automatic profile selection facility makes use of a list of profiles you created. When enabling this
function for the first time, tap List to select the profiles in use. After the list is defined, as long as the
facility is active and the radio is not associated to an access point, SCU will run through the list and try
out each profile one by one until the radio associates to an access point. The profile becomes the
Active Profile and remains so until the radio disassociates or disconnects from the network.
Note: The SCU allows setting up a maximum of 19 profiles in the Auto Profile list.
134
Tap List to open a list of existing
profiles to select.
Reference Manual