CipherLab CP60 Reference Manual page 250

CP60 Mobile Computer
MSI
MSI
MSI
Length option
Check Digit Option
Transmit Check Digit
Algorithm
UPC/EAN
EAN-8
EAN-8
EAN-8 Extend
EAN-13
EAN-13
Bookland EAN
Bookland ISBN Format
UPC-A
UPC-A
Preamble
Transmit Check Digit
UPC-E
UPC-E
238
Checkbox to enable MSI decoding.
Sets the length of the MSI symbols to decode.
One Fixed length (Length 1)
Two Fixed lengths (Length 1>Length 2)
Max / Min Length (range: 0-255; Length 1<Length 2)
Any Length
One check digit is mandatory for decoding MSI barcodes.
Select whether a second check digit should be verified. If the
check digits are incorrect, the barcode will not be accepted.
One Check Digit
Two Check Digits
Decide whether to include the check digit in the data being
transmitted.
When two check digits are set for verification, two
choices are available for the pair of check digits.
Modulo10 / Modulo11
Double Modulo 10
Checkbox to enable EAN-8 decoding.
Checkbox to enable converting EAN-8 to EAN-13 format.
Checkbox to enable EAN-13 decoding.
Checkbox to enable ISBN decoding. If enabled, select
Bookland ISBN Format in the drop-down box below.
Decodes Bookland data starting with 978 in 10-digit format
along with the Bookland check digit, or Bookland data
starting with 978/979 as EAN-13 format.
Checkbox to enable UPC-A decoding.
Decide whether to
preamble System Character (and Country Code) in the data
being transmitted.
No transmit: transmits none of the above
Transmit System Character: transmits system number
only
Transmit Sys. Character and Country Code: transmits
system number and country code
Decide whether to include the UPC-A check digit (the last
character in the barcode) in the data being transmitted.
Checkbox to enable UPC-E decoding.
include the UPC-A/UPC-E/UPC-E1
Reference Manual
Enable
Max / Min
Length
(4-55)
One Check
Digit
Disable
Double
Modulo 10
Enable
Disable
Enable
Enable
Bookland
ISBN-10
Enable
Transmit
System
Character
Enable
Enable