CipherLab CP60 Reference Manual page 229

External Power
Profile
BUTTON ASSIGNMENT
Redefines key functions under keypad's normal and function mode. See
Assignment for more details.
CERTIFICATES
Views or deletes the digital certificates used by some applications to access some
secured networks. See also
COM PORT MAPPING
Changes the function each COM port serves. COM ports 1 through 9 are
re-assignable. Default settings are as follows:
COM port Default Settings
COM1 Scan engine (Laser or 2D)
COM2 Bluetooth hardware port
COM3~8 N/A
COM9 GPS hardware port
Default button restores all COM port settings back to factory default.
Upon system reboot, the mobile computer checks whether there is a registry
entry for Bluetooth Serial Port Profile (SPP) or Dial-up Profile (DUN). These
profiles (if existent) are assigned to fixed ports and cannot be re-assigned.
Check if any COM ports are occupied by Bluetooth SPP before editing COM port
function.
After editing COM port settings, tap OK command on the softkey bar. A prompt
will appear warning that the system needs to reboot in order to apply settings.
Tap OK to reboot, or Cancel to discard changes.
Turn off LCD backlight if device is not used
for:
Turn off keypad backlight if device is not
used for:
Turn on LCD backlight when a button is
pressed or the screen is tapped
Turn on keypad backlight when a button is
pressed
Sets the screen backlight timeout on external power and whether
to trigger screen/keypad light up upon pressing a key.
Option
Turn off LCD backlight if device is not used
for:
Turn off keypad backlight if device is not
used for:
Turn on LCD backlight when a button is
pressed or the screen is tapped
Turn on keypad backlight when a button is
pressed
Sets backlight profiles or restores them back to default.
Install Secure
Chapter 8 Manage Mobile Computer
Certificates.
Checked;
2 min
Checked;
10 sec
Checked
Checked
Default Settings
Checked;
2 min
Unchecked
Checked
Checked
Button
217