Configure Reader - CipherLab RS31 Reference Manual

RS31 Mobile Computer

6.1. CONFIGURE READER

The mobile computer is capable of reading printed barcodes. The reader module can be
either a (laser) 1D reader or a 2D imager. The mobile computer is installed with a Reader
Config to configure the scan engine built inside. Use it to create a profile of settings that best
suits your needs.
LAUNCH READER CONFIG
To launch Reader Config:
Tap Apps
1)
Reader Config launches in context with the reader module(s) on board the mobile
2)
computer. On the main settings page are three sections: General Settings,
Symbology and Miscellaneous.
140
| ReaderConfig to open the Reader Configuration Utility.