CipherLab CP60 Reference Manual page 190

CP60 Mobile Computer
GPS Settings opens to show Programs tabbed page.
This page shows the default COM port through which GPS data obtained by GPS
hardware is streamed to location discovery applications on the mobile computer. Do not
change the settings on this page.
14) Tap Hardware tab.
Hardware tabbed page opens showing GPS hardware port. The default GPS hardware
port on the mobile computer is COM 9. Change this port to the port number you selected
in step 10. The mobile computer will use this port to capture GPS data using the external
GPS receiver.
15) Tap Access tab.
178
The default COM port the mobile computer
uses to stream GPS data to applications
Change GPS hardware port to the port
added for the external GPS receiver
Reference Manual