Enable/Disable Mobile Data; Use Only 2G Networks - CipherLab CP60 Reference Manual

Network tabbed page opens showing the network currently connected to at the top.

5.1.3. ENABLE/DISABLE MOBILE DATA

To turn on/off the mobile computer's mobile data (HSPA+):
1) On Start screen, tap Settings | Connections | Wireless Manager
Wireless Manager opens.
2) Tap the "Menu" command on the softkey bar.
Option menu opens.
3) Tap Disconnect Cellular Data.
Mobile data is disabled.

5.1.4. USE ONLY 2G NETWORKS

Limit mobile data to 2G networks (GPRS or EDGE) to extend battery life or when you are not
intensively transmitting data.
To limit mobile data to only 2G:
1) On Start screen, tap Settings | Connections | Wireless Manager
Wireless Manager opens.
2) Tap the "Menu" command on the softkey bar.
Option menu opens.
3) Tap Phone Settings.
Phone settings open.
4) Tap continuously on the tabs to bring GSM/UMTS tab into view.
5) Tap GSM/UMTS tab.
Phone settings
Network tabbed page
Network you're currently using
Chapter 5 Radios
.
.
125