CipherLab CP60 Reference Manual page 81

HOW TO OUTPUT
After the output destination is set, configure how to output decoded data, i.e. the "format"
to present decoded data.
Setting
Auto Enter
Auto Enter character
Display Code Type
Show Code Length
Prefix
Suffix
ENABLE READER
Features a checkbox to enable or disable reader scanning ability. When enabled, laser beam
will be sent out each time the trigger is pressed.
Description
Adds an ENTER character before or after each scanning act.
This function saves the trouble pressing [Enter] key to
confirm each scan. Options are:
Disable
Decoded data + Enter
Enter + Decoded data
Adds a key code before or after the decoded data. This
setting is available only when [Auto Enter] is enabled.
Options are:
None
Carriage Return
Tab
Space
Comma
Semicolon
Prefixes the output data with code type information.
Suffixes the output data with code length information.
Affixes 0 to 10 characters to the left of the output data.
Affixes 0 to 10 characters to the right of the output data.
Chapter 2 Data Capture
Default
Disable
Carriage
Return
Deselected
(Disabled)
Deselected
(Disabled)
--
--
69