CipherLab CP60 Reference Manual page 152

CP60 Mobile Computer
Radio Mode
Auth Type
Encryption This specifies the type of key used to encrypt and decrypt transmitted data, and how
that key is specified or derived. Select Encryption type in the drop-down box, then
tap WEP keys/PSKs to open a dialog box to define relevant information.
Item
None
WEP
WEP EAP
WPA-PSK
WPA TKIP
WPA CCKM
WPA2-PSK
WPA2 AES
WPA2 CCKM
140
bit rate.
Value: Auto (rate negotiated automatically with AP) or the
specified value in megabits per second (1, 2, 5.5, 6, 9, 11,
12, 18, 24, 36, 48, 54)
Default: Auto
Use of 802.11a/b/g/n when interacting with an AP.
Value: B rates only, BG rates full, G rates only, A rates only,
ABG rates full, BGA rates full, Ad Hoc
Default: BG rates full
802.11 authentication type used when associating to an AP.
Value: Open, Shared (shared-key), LEAP (Network-EAP)
Default: Open
It is recommended that the default setting Open is
selected.
Description
No encryption
WEP with up to four static keys, 40-bit or 128-bit in ASCII or hex
WEP with key generated during EAP authentication
TKIP with PSK, ASCII passphrase or hex PSK
TKIP with key generated during EAP authentication
TKIP with key generated during EAP authentication and with Cisco
key management protocol for fast re-authentication
AES with PSK, ASCII passphrase or hex PSK
AES with key generated during EAP authentication
AES with key generated during EAP authentication and with Cisco
Reference Manual