Using The Cp30 Mobile Computer; Battery - CipherLab CP30 Series Reference Manual

USING THE CP30 MOBILE COMPUTER

This chapter explains the features and usage of the mobile computer.
IN THIS CHAPTER
1.1 Battery ...................................................................... 15
1.2 Memory ..................................................................... 18
1.3 Keypad ...................................................................... 19
1.4 Touch Screen ............................................................. 23
1.5 Notifications ............................................................... 25
1.6 Data Capture .............................................................. 27
1.7 Cradle ....................................................................... 28

1.1 BATTERY

Main Battery

The mobile computer is powered by a rechargeable 3.7 V/2200mAh Li-ion battery
pack, and it takes approx. 4 hours to charge it to full from the power adaptor or
approx. 8 hours from the USB cable (at 500mA). However, the charging time may
vary by working condition.
Spare Battery

The spare battery for accessory takes charge when the main battery is removed or
drained out. However, you have to replace the main battery as soon as possible.
Backup Battery

Lithium Battery, RTC retention when main battery is not existent.
Warning: The battery cover must be in position. If not, the mobile computer cannot
turn on by pressing [Power] or wake up by pressing [Scan], and the red LED indicator
will flash twice to alert.
For a new battery, make sure it is fully charged before using. Always prepare a spare
battery pack, especially when you are on the road.
Chapter 1
15