Table of Contents
Advertisement
3. After attaching the brackets, have another person hold the switch on
the plywood base on the wall while you secure it with four screws (not
provided with the switch). Refer to Figure 36.
Please follow these guidelines as you position the switch on the wall:
Position it so that the front panel is either on the left or right. Refer
to Figure 32 on page 56. Do not install it with the front panel facing
up or down.
Leave sufficient space from other devices or walls so that you can
access the front and back panels, and for adequate air ventilation.
Figure 36. Securing the Switch to the Plywood Base
4. Go to Chapter 6, "Powering On the Switch" on page 75.
XS900MX Series Installation Guide for Stand-alone Switches
63
Advertisement
Table of Contents
