Installing Batteries In The Remote Control - Epson BrightLink 1480Fi User Manual

Setting
Edge Blending >
select any edge >
Blend Range
Note: If you are using the projectors in the same room as another projector that does not support multi-
projector connections, set the Installation of Projectors > Infrared Intensity setting to Strong.
Non-interactive Setup (2-4 Projectors)
Setting
Multi-Projection Menu
HDMI Out Setting
Number of Projectors Specify the number of projectors connected in a series
Order
Parent topic:

Installing Batteries in the Remote Control

The remote control uses the two AA batteries that came with the projector.
Caution: Use only the type of batteries specified in this manual. Do not install batteries of different types,
or mix new and old batteries.
Projector 1
300
Projector 1
Process Out
Specify the position of the projectors in number order from left to right
Connecting Multiple Projectors of the Same Model
Projector 2
300
Projectors 2-4
Pass Through
60