Using Interactive Features With Two Projectors (Duolink) - Epson BrightLink 1480Fi User Manual

The projectors start connecting.
4. Enter the Projector Keyword if necessary.
When the connection is established, a connection status bar appears at the top of the distributing
projector's screen. Each receiving projector displays a message indicating that it cannot share the
image on the screen until the distributing projector selects an input source.
5. Repeat steps 3-4 to connect any remaining projectors.
6. Select the input source you want to display.
The projected screen is shared with the receiving projectors on their LAN input source.
7. To end screen sharing from the distributing projector, select the Stop Sharing icon in the status bar
at the top of the screen.
Note: To end screen sharing from the receiving projectors, select the
toolbar.
You can also restrict drawing from receiving projectors. Press the
and select Screen Sharing. In the list of connected projectors, tap the projector you wish to restrict
drawing from and disable the drawing setting.
Parent topic:

Using Interactive Features with Two Projectors (DuoLink)

You can use your projector's interactive features while projecting with two projectors installed side by
side (BrightLink 1485Fi). If you're using a Mac, download and install the software from the website to get
started.
See the online DuoLink Setup Guide for additional information.
Parent topic:
Sharing the Projected Screen
Using the Interactive Features
Home button on the remote control
261
Stop Sharing icon on the