Epson PowerLite Home Cinema 1450 Quick Setup

PowerLite Home Cinema 1450
®
Quick Setup
Before using the projector, make sure you read the safety instructions in the
online User's Guide.
Connect the projector
Choose from the following connections. See the sections below or the online
User's Guide for details.
Video device
Connect multiple video devices, including a cable or satellite box, and use
the Source Search button on the projector or the remote control to switch
between them.
Mobile media device
Connect tablets, smartphones, and other devices that support the MHL™
standard to the HDMI1/MHL port.
Some devices may require an adapter or may not require an MHL cable. Not all
features or functions may be supported. Check your device's documentation for
more information.
Computer
Connect one end of an HDMI cable to the projector's HDMI1/MHL or HDMI2
ports and the other end to an HDMI port on your computer.
Note: For more information on connecting the projector to your computer or
other devices (camera, USB flash drive, etc.), see the online User's Guide.
Connect audio
Built-in speaker
The projector has a built-in speaker that can play audio from a video source
(DVD player, streaming device, etc.) connected by an HDMI cable. If you do not
use an HDMI connection, you must connect your device's audio output to the
projector's audio input.
Audio Out port
You can connect the projector to external self-powered speakers through the
Audio Out port.
RCA video cable
(composite video)
HDMI cable
Component video to VGA cable
MHL cable
Streaming device
HDMI cable
RCA audio cable
3.5 mm stereo mini cable
3.5 mm stereo mini cable
External speakers
Connect your device's audio output to your home theater receiver or powered
speakers.
Note: The internal speaker is disabled when an external device is connected.
If you are using an HDMI connection to the projector, you may need to reduce
the projector speaker volume to zero (0), or make sure that the correct audio
output is selected on your device.
Home theater system
Video source
Surround sound
Powered speakers
External speakers Video source
Note: See your home theater receiver documentation for more information
on connections.
Turn on your equipment
1
Turn on your computer or video source.
2
Plug in the projector. The On/Standby light on the projector turns blue.
3
Open the A/V Mute slide all the way.
4
Press the power button on the projector or remote control. The
projector beeps, the Status light flashes blue, and then stays on.
Note: To shut down the projector, press the
Video cable
Receiver Projector
Video cable
Projector
power button twice.