Removing And Attaching The Cable Cover; Projector Connections - Epson BrightLink 1480Fi User Manual

Parent topic:

Removing and Attaching the Cable Cover

Before you can connect equipment to your projector, you need to remove the cable cover.
1. Loosen both of the screws securing the cable cover and lift off the cable cover.
To attach the cable cover, replace the cable cover and tighten the cable cover screws.
Parent topic:

Projector Connections

See these sections to connect the projector to a variety of projection sources.
Caution: If you will use the projector at altitudes above 4921 feet (1500 m), turn on High Altitude Mode
to ensure the projector's internal temperature is regulated properly.
Projector Placement
Setting Up the Projector
39