Selecting Settings For Emailing Whiteboard Pages - Epson BrightLink 1480Fi User Manual

Selecting Settings for Emailing Whiteboard Pages

You can select the settings for emailing whiteboard pages from the projector.
1. Press the Menu button on the remote control.
2. Select the Interactive menu and press
3. Select the Mail menu and press
4. Select the following options for emailing as necessary:
• Mail Function lets you share captured whiteboard pages via email.
• SMTP Server lets you enter the IP address or fully qualified domain name (FQDN) for the mail
server. You can enter up to 64 alphanumeric characters. If you specify an FQDN, you must
configure a DNS server. Do not use spaces or the following symbols: " * + , : ; < = > ? [ \ ] ` |
Note: You cannot use the following IP addresses: 127.x.x.x, 192.0.2.x, or 224.0.0.0 to
255.255.255.255 (where x is a number from 0 to 255).
• Port Number lets you enter a port number for the SMTP server. The default port is 25 when set to
Open, 465 for SSL, and 587 for TLS.
Enter.
Enter.
245