Solutions When The Image Is Not Rectangular - Epson BrightLink 1480Fi User Manual

Related references
Input Signal Settings - Signal I/O Menu
Installation Settings - Installation Menu
Image Quality Settings - Image Menu
Related tasks
Changing the Image Aspect Ratio
Zooming Into and Out of Images

Solutions When the Image is Not Rectangular

If the projected image is not evenly rectangular, try the following solutions:
• If the projector is not mounted on the wall or ceiling, place it directly in front of the center of the screen,
facing it squarely, if possible.
• Use the Image Shift setting to adjust the image position, rather than moving the projector.
• Press the keystone buttons on the projector to adjust the image shape.
• Adjust the image shape using the individual Geometry Correction settings in the Installation menu.
Note: Adjusting Quick Corner, H/V-Keystone, and Arc Correction settings may affect focus and
pen calibration.
Note: If the projector is mounted on the wall, always use the adjustment dials on the mount to center
the image.
Parent topic:
Related references
Installation Settings - Installation Menu
Image Quality Settings - Image Menu
Related tasks
Correcting Image Shape with Arc Correction
Correcting Image Shape with the Keystone Buttons
Correcting Image Shape with Quick Corner
Solving Image or Sound Problems
338