Brightness Level setting
85%
80%
70%
Note: The light source usage hours vary depending upon environmental conditions and usage. The
hours listed here are an approximate and are not guaranteed. After 20000 hours of use, you may need to
replace parts in the projector. If Maintain Brightness is turned on, and you have exceeded the usage
hours listed here, you may not be able to select a high Maintain Brightness Level setting.
Parent topic:
Turning On Automatic Luminance Adjustment
You can turn on the Dynamic Contrast setting to automatically optimize the image luminance. This
improves the image contrast based on the brightness of the content you project.
1. Turn on the projector and switch to the image source you want to use.
2. Press the Menu button.
Hours
6000 hours
10000 hours
19000 hours
Adjusting the Projector's Brightness Level
148