Sharing The Projected Screen; Starting A Shared Screen Session - Epson BrightLink 1480Fi User Manual

4. To swap the projected image and whiteboard from left to right, select the
center divider.
You cannot perform the following operations during split screen projection:
• E-Zoom
• Switching aspect mode
Parent topic:

Sharing the Projected Screen

Follow the instructions in these sections to share the projected screen with other compatible BrightLink
projectors.
The screen sharing function is limited by the following:
• You cannot share images or content that are protected by HDCP.
• You cannot change the projector's Network settings while screen sharing.
• The Screen Type setting in the Installation menu must be set to 16:9, 16:10, or 4:3.

Starting a Shared Screen Session

Parent topic:
Starting a Shared Screen Session
You can share the projector's screen with up to 4 compatible projectors on the same network. Users can
interact with the shared screen from the connected projectors.
To use the Screen Sharing feature, the distributing and receiving projectors must be connected to the
same network and have the Screen Sharing setting enabled in the projector's Network menu. Other
requirements include the following:
• On the distributing projector: if you want to skip authentication of keywords for other projectors to
speed up connection, set the Connection Mode setting to Keyword Off in the projector's Network
menu.
• On the receiving projectors: make sure that no computer is connecting to the projector using Epson
iProjection software, and that the Screen Type setting in the projector's Installation menu matches
that of the distributing projector.
1. Turn on the projector, if necessary.
2. Press the
3. Enter the IP address of the projector you want to share your screen with and select Connect.
Using the Interactive Features
Using the Interactive Features
Home button on the remote control and select Screen Sharing on the Home screen.
260
at the bottom of the