Epson BrightLink 1480Fi User Manual page 331

On/Standby Status light
light
Off Flashing blue
Flashing blue Varies
Off Flashing blue
Off Flashing blue
Off Flashing blue
Varies Flashing blue
Laser light Temp light
Off Orange
Flashing Varies
orange
Orange Off
Off Flashing
orange
Flashing Off
orange
Flashing Varies
orange
331
Status and solution
Projector has overheated and turned
off. Leave it turned off to cool down.
After about five minutes, do the
following:
• Make sure that the vents and air
filter are not clogged with dust or
obstructed by nearby objects.
• Make sure the environmental
temperature is not too hot.
• Clean or replace the air filter.
• If operating the projector at high
altitude, turn on High Altitude
Mode.
• If the problem persists, unplug the
projector and contact Epson for
help.
Laser warning. Turn the projector off,
unplug it, and contact Epson for help.
Laser has a problem. Turn the
projector off, unplug it, and contact
Epson for help.
A fan or sensor has a problem. Turn
the projector off, unplug it, and
contact Epson for help.
Internal projector error. Turn the
projector off, unplug it, and contact
Epson for help.
Refresh Mode is in progress.