Epson BrightLink 1480Fi User Manual page 276

Setting
Image Shift
Connect ELPCB02
Touch Unit
Remote Receiver
Projector ID
(BrightLink 1480Fi)
Options
Varying positions available
On
Off
Installation Pattern
Power
Touch Unit Setup
Touch Calibration
Calibration Range
Front/Rear
Front
Rear
Off
Off
1 through 9
276
Description
Adjusts the position of the
projected image
Set to On to switch the input
source between the HDMI2 port
and HDMI3 port each time you
press the HDMI2 button on the
optional interface box
Installation Pattern: displays a
pattern to help you adjust the
position of the Touch Unit
Power: turns on the Touch Unit
power
Touch Unit Setup: performs
angle adjustment for laser
diffusion
Touch Calibration: performs
calibration for finger touch
operations
Calibration Range: if finger
touch operations are recognized
as drag operations, select Wide
to widen the calibration range
Limits reception of remote control
signals by the selected receiver;
Off turns off all receivers
Assigns an ID for the projector
when you use multiple projectors