Selecting The Connected Usb Source; Disconnecting A Usb Device From The Control Pad Or Projector; Connecting To A Document Camera - Epson BrightLink 1480Fi User Manual

Related tasks
Starting a PC Free Slide Show

Selecting the Connected USB Source

You can switch the projector's display to the source you connected to one of the USB-A ports. To display
the connected USB device, select the USB1 source.
Note: If you have connected a document camera using a USB cable, select the USB2 source.
1. Make sure the connected USB source is turned on, if necessary.
2. Press the USB or Source Search button on the remote control and select the USB1 or USB2
source.
Parent topic:
Related tasks
Starting a PC Free Slide Show

Disconnecting a USB Device From the Control Pad or Projector

When you finish presenting with a connected USB device, you must prepare to disconnect the device
from the control pad (BrightLink 1485Fi) or projector.
1. If the device has a power button, turn off and unplug the device.
2. Disconnect the USB device (or cable) from the control pad (BrightLink 1485Fi) or projector.
Parent topic:
Related tasks
Starting a PC Free Slide Show

Connecting to a Document Camera

You can connect a document camera to your projector to project images viewed by the camera.
Note: If you connect a document camera to one of the USB-A ports on the projector, select the USB2
source to display the image. You cannot simultaneously connect two document cameras to the USB-A
ports.
Connecting to External USB Devices
Connecting to External USB Devices
55