Available Image Aspect Ratios - Epson BrightLink 1480Fi User Manual

3. To cycle through the available aspect ratios for your input signal, press the Aspect button
repeatedly.
Note: To remove black bars when projecting from a computer, set the Resolution setting to Wide or
Normal in the Image menu, depending on your computer's resolution.
Parent topic:
Related references
Image Quality Settings - Image Menu

Available Image Aspect Ratios

You can select the following image aspect ratios, depending on the selected Screen Type setting and
input signal from your image source.
Note: Black bands and cropped images may project in certain aspect ratios, depending on the aspect
ratio and resolution of your input signal.
Aspect ratio setting
Auto
Full
Zoom
Native
Note: The appearance of the Native image aspect ratio setting varies depending on the input signal.
If there are margins between the images edges and the screen, you can adjust the position of the
projected image using the Screen Position setting in the Installation menu.
Parent topic:
Image Aspect Ratio
Description
Automatically sets the aspect ratio according to the input signal and
the Resolution setting.
Displays images using the full width of the projection area, but does
not maintain the aspect ratio.
Displays images using the full width of the projection area and
maintains the aspect ratio of the image.
Displays images as is (aspect ratio and resolution are maintained).
Image Aspect Ratio
137