Solutions When The Interactive Pens Are Slow Or Difficult To Use; Solutions When The Interactive Pens Cause Interference Or Unwanted Effects - Epson BrightLink 1480Fi User Manual

Related tasks
Adjusting the Pen Operation Area
Removing and Attaching the Cable Cover
Zooming Into and Out of Images

Solutions When the Interactive Pens Are Slow or Difficult to Use

If the pens are difficult to use or respond too slowly, try the following solutions:
• For easier operation, hold the pen perpendicular to the projection surface.
• For the best performance, connect your computer to the projector using a VGA or HDMI cable for
display and the USB cable for interactivity.
• If you are using USB Display in Windows, you may need to disable Windows Aero in the Epson USB
Display Settings program on your computer.
• If you are having difficulty double-clicking on a Mac, go to the System Preferences menu, select
Mouse, Trackpad, or Mouse & Trackpad, and reduce the Double-click speed.
• Set the Pen/Touch > Pen Hovering setting to Off.
Parent topic:
Related references
Pen and Touch Setup Settings - Pen/Touch Menu
Related tasks
Using the Pens

Solutions When the Interactive Pens Cause Interference or Unwanted Effects

If the pens are causing interference or unwanted effects, try the following solutions:
• When you use two pens at the same time, make sure to use them at least 4 inches (10.16 cm) apart.
• Do not rest the pens on the image area of an interactive table to avoid interference with your
computer's mouse.
• Make sure that nothing is blocking the direct line to the interactive pen receiver on the projector.
Parent topic:
Solving Interactive Problems
Solving Interactive Problems
352