Connecting To A Trigger Out Port; Installing Batteries In The Remote Control - Epson Home Cinema 5050UBe User Manual

2 Surround sound speakers
3 Receiver
4 Video cable
Parent topic:

Connecting to a Trigger Out Port

You can connect your projector to external devices such as motorized screens that support a trigger
signal. When active, a 12V (200 mA maximum) signal is sent to the connected device while the projector
is powered on.
1. Connect a 3.5 mm stereo mini-jack cable to the external device's trigger port. See your device's
documentation for details.
2. Connect the other end to the projector's Trigger Out port.
3. Turn on the Trigger Out setting in the projector's Extended menu.
Parent topic:
Related references
Projector Setup Settings - Extended Menu

Installing Batteries in the Remote Control

The remote control uses the two AA batteries that came with the projector.
Caution: Use only the type of batteries specified in this manual. Do not install batteries of different types,
or mix new and old batteries.
Projector Connections
Projector Connections
35