Epson BrightLink 1480Fi User Manual page 84

1. Press the Menu button.
2. Select the Network menu and press
3. Select Network Settings and press
4. Do one of the following:
• To connect directly to a wireless device (Simple AP mode), select Passphrase, press
and enter a passphrase from 8 to 63 characters long. When you are done, return to the Network
Settings screen, select Set, and follow the on-screen instructions to save your settings and exit
the menus. Skip the rest of these steps.
• To connect to a device via a wireless network router (infrastructure mode), select the Wireless
LAN menu and press
5. Select the Security setting and press
6. Select the security settings for your network.
7. Do one of the following according to the security you selected:
• WPA3-PSK or WPA2/WPA3-PSK: Select Passphrase, press Enter, and enter a passphrase
from 8 to 63 characters long. Then continue with step 9.
Enter.
Enter.
Enter. Continue with the next step.
Enter.
84
Enter,