Installing Batteries In The Remote Control - Epson EH-LS650B User Manual

4. Turn on your device and start the pairing process on it. See the documentation supplied with the
device for more information.
Compatible devices are displayed on-screen when discovered by the projector. You cannot connect
multiple devices by Bluetooth at the same time.
5. Select the device you want to connect to and press Enter.
6. Follow the on-screen instructions to complete pairing.
Note: If pairing is unsuccessful, make sure the Bluetooth Speaker mode is set to Off.
7. Press the
Parent topic:

Installing Batteries in the Remote Control

The remote control uses the two AAA batteries that came with the projector. Replace the batteries as
soon as they run out.
Caution: Use only the type of batteries specified in this manual. Do not install batteries of different types,
or mix new and old batteries.
1. Remove the battery cover.
esc button to exit the menus.
Projector Connections
34