Scheduling Projector Events; Saving A Scheduled Event - Epson BrightLink 1480Fi User Manual

Note: If the projector does not turn off and the lights continue flashing, see the link below for a
solution.
Parent topic:

Scheduling Projector Events

You can save a projector command, such as turning the projector on or off or switching input sources, as
an "event." You can schedule when you want the projector to automatically execute the command.
Caution: Do not place flammable objects in front of the lens. If you schedule the projector to turn on
automatically, flammable objects in front of the lens could catch on fire.
Note: The Schedule setting in the Menu Protection menu must be turned off to schedule an event.

Saving a Scheduled Event

Viewing Scheduled Events
Editing a Scheduled Event
Parent topic:
Related tasks
Selecting Password Security Types
Setting a Password
Saving a Scheduled Event
You can select projector commands you want to perform and schedule them as an event.
Note: Light Source Calibration events do not start if the projector is not used continuously for at least 20
minutes, or if the projector is regularly turned off by shutting off the power outlet. Set Light Source
Calibration events to occur only after 100 hours of usage.
Note: The Schedule setting in the Menu Protection menu must be turned off to schedule an event.
1. Set the date and time in the Management menu.
2. Press the Menu button.
3. Select the Management menu and press Enter.
4. Select the Schedule Settings setting and press Enter.
Copying Menu Settings Between Projectors
Adjusting Projector Features
199