Danfoss VLT Automation Drive FC 300 Operating Instructions Manual page 79

®
VLT Automation Drive FC 300
Operating Instructions High Power
Data type
2
3
4
5
6
7
9
33
35
54
See the frequency converter
Parameters for the frequency converter are grouped into various parameter groups for easy se-
lection of the correct parameters for optimized operation of the frequency converter.
0-xx Operation and Display parameters for basic frequency converter settings
1-xx Load and Motor parameters, includes all load and motor related parameters
2-xx Brake parameters
3-xx References and ramping parameters, includes DigiPot function
4-xx Limits Warnings, setting of limits and warning parameters
5-xx Digital inputs and outputs, includes relay controls
6-xx Analog inputs and outputs
7-xx Controls, setting parameters for speed and process controls
8-xx Communication and option parameters, setting of FC RS485 and FC USB port parameters.
9-xx Profibus parameters
10-xx DeviceNet and CAN Fieldbus parameters
13-xx Smart Logic Control parameters
14-xx Special function parameters
15-xx Drive information parameters
16-xx Read out parameters
17-xx Encoder Option parameters
32-xx MCO 305 Basic parameters
33-xx MCO 305 Advanced parameters
34-xx MCO Data Readout parameters
Description
Integer 8
Integer 16
Integer 32
Unsigned 8
Unsigned 16
Unsigned 32
Visible String
Normalized value 2 bytes
Bit sequence of 16 boolean variables
Time difference w/o date
Design Guide
for further information about data types 33, 35 and 54.
MG.33.U1.02 - VLT ® is a registered Danfoss trademark
4. How to Programme
Type
Int8
Int16
Int32
Uint8
Uint16
Uint32
VisStr
N2
V2
TimD
79
4