Rated Power; Mechanical Installation - Danfoss VLT Automation Drive FC 300 Operating Instructions Manual

®
VLT Automation Drive FC 300
Operating Instructions High Power

3.2.6. Rated Power

Enclosure type
Enclosure
protection
Rated
power
Enclosure type
Enclosure
protection
Rated
power

3.3. Mechanical Installation

Preparation of the mechanical installation of the frequency converter must be done carefully to
ensure a proper result and to avoid additional work during installation. Start taking a close look
at the mechanical drawings at the end of this instruction to become familiar with the space de-
mands.
D1
IP 21/54
NEMA Type 1/ Type 12 Type 1/ Type 12
90 - 110 - kW at 400 132 - 200 kW at 400
V
(380 - 500 V)
110 - 132 kW at 690 160 - 315 kW at 690
V
(525-690 V)
IP
NEMA
250 - 400 kW at 400 V
355 - 560 kW at 690 V
MG.33.U1.02 - VLT ® is a registered Danfoss trademark
D2 D3
21/54 00
Chassis
90 - 110 - kW at 400
V V
(380 - 500 V) (380 - 500 V)
110 - 132 kW at 690
V V
(525-690 V) (525-690 V)
E1
21/54
Type 1/ Type 12
240 - 400 kW at 400 V
(380 - 500 V)
355 - 560 kW at 690 V
(525-690 V)
3. How to Install
D4
00
Chassis
132 - 200 kW at 400
V
(380 - 500 V)
160 - 315 kW at 690
V
(525-690 V)
E2
00
Chassis
(380 - 500 V)
(525-690 V)
19
3