Danfoss VLT Automation Drive FC 300 Operating Instructions Manual page 36

3. How to Install
Before installing the back panel in the enclo-
sure assemble the gasket on both sides of the
bottom duct adapter as shown below, and in-
stall on the bottom of the frequency convert-
er.
3
36
Illustration 3.31: Bottom duct adapter
Illustration 3.32: Bottom duct adapter with gasket
installed
Illustration 3.33: Bottom duct adapter installed
Illustration 3.34: Side view
MG.33.U1.02 - VLT ® is a registered Danfoss trademark
®
VLT Automation Drive FC 300
Operating Instructions High Power