How To Programme On The Numerical Local Control Panel - Danfoss VLT Automation Drive FC 300 Operating Instructions Manual

4. How to Programme

4.1.2. How to Programme on the Numerical Local Control Panel

The following instructions are valid for the nu-
merical LCP (LCP 101):
The control panel is divided into four
functional groups:
1.
2.
4
3.
4.
72
Numerical display.
Menu keys and indicator lights -
changing parameters and switching
between display functions.
Navigation keys and indicator lights
(LEDs).
Operation keys and indicator lights
(LEDs).
MG.33.U1.02 - VLT
Operating Instructions High Power
® is a registered Danfoss trademark
®
VLT Automation Drive FC 300