Communication Interfaces; Protections; Programmability; Compliance With The Standards - Infranor Gem Drive GD1 Series Installation Manual

GD1 – Installation Guide
CALCULATION OF THE AVERAGE RATED POWER OF THE
1.3 – COMMUNICATION INTERFACES
The standard version of the GD1 is delivered with the CANopen
available with other interfaces.
1.4 – PROTECTIONS
(according to EN 954-1 standard)
Safe torque off (see appendix)
1.5 – PROGRAMMABILITY
Servo functions
User program (see Programmation
1.6 – COMPLIANCE WITH THE STANDARDS
1.6.1 – G
ENERAL DESCRIPTION
The supply of the DC/DC converter requires an auxiliary 24 V supply +/-15%. A 24 V
specific wiring allows to keep the position even after switching off the auxiliary 24 V
The power supply is depending on the drive type:
♦
GD1-230/05 A to 30 A: integrated 230 V
♦
GD1-400/05 A to 20 A: integrated 230 to 480 V
♦
GD1-400/30 – 45 – 60 - 90 A: 230 to 480 V
supply unit GDPS-400
An integrated soft start system of the power supply limits the inrush current at power on.
The small dimensions of the GD1 drive allow an optimum integration:
♦
in 300 mm deep cabinets (connectors included) when fastened on the cabinet rear wall,
♦
in 240 mm deep cabinets with wall-crossing fastening
♦
Mounting pitch: 74.5 mm up to a current rating of 45 A and double-pitch for higher currents (60 A and 90 A).
Part 1 – Chapter 1 – General description

communication interface. But this drive is also
Guide)
single-phase mains operated power supply
AC
three-phase mains operated power supply
AC
three-phase mains operated supply with external power
AC
(see diagram in chapter 2, section
APPLICATION: see section 4.9.2
battery supply with
DC
supply.
DC
2.2),
11