X13 Connector: Additonnal Braking Resistor; Ac Single-Axis Configuration - Infranor Gem Drive GD1 Series Installation Manual

GD1 – Installation Guide
3.14.2 – T -
HREE PHASE POWER INPUT CONNECTOR FOR THE
4 pins male with 7.62 mm pitch (female connector provided).
Tightening torque of the connector screws: 0.5 to 0.6 Nm.
PIN SIGNAL
1 Phase L1
2 Phase L2
3 Phase L3
4 GND
3.14.3 – X13 C
ONNECTOR
2 pins female spring contact connector (no polarity).
Connection of the internal additional resistor 200 R/65 W or
Connection of the external additional resistor, type dp 50/200 for internal single-phase 230 V
Connection of the external additional resistor, type 33/280 for internal 3-phase 400 V
Part 1 – Chapter 3 – Inputs-Outputs
I/O FUNCTION
I
Power input 400 V
I
I
Mains ground
:
ADDITONNAL BRAKING RESISTOR
400 V
SINGLE
AC
Irms rated = max. 10 A
three-phase
AC
600 V / 105°. Section: 1 mm
(AWG16)
-
AXIS CONFIGURATION
DESCRIPTION
supply or
AC
supply.
AC
2
29