Setup Process Of A Misphere System - Barco MiSPHERE Installation Manual

5. SETUP PROCESS OF A MISPHERE SYSTEM

About this chapter
This chapter describes roughly the installation process of the MiSPHERE system. Several process stages refer to one or more of
the detailed "Basic setup procedures", page 31.
W
ARNING
string is limited, maximum 64 MiSPHERE units per string. Never put additional load or downwards traction
onto the MiSPHERE string.
W
ARNING
sure you read, understand and follow all safety instructions mentioned in the chapter "Safety", page 3, of this
installation manual. Furthermore, be sure that all installation requirements for your MiSPHERE system are
fulfilled, see "Installation requirements", page 9.
W
ARNING
with the local regulations regarding such installations and that the truss installation will be able to support
the complete load of the MiSPHERE system.
Overview
• Set up a MiSPHERE system
R5976941 MISPHERE 03/01/2006
:
The MiSPHERE is designed to install in a hanging configuration only. The length of the MiSPHERE
:
Safety first. Fence off the installation area before starting to install your MiSPHERE system. En-
:
Be sure that the truss installation, on which you want to hang the MiSPHERE system, complies
5. Setup process of a MiSPHERE system
27