Table of Contents
Advertisement
7. CABLING OF MISPHERE CONTROL BOXES
Outdoor plugs and sockets for MiSPHERE control boxes
Barco uses special designed outdoor sockets for power and data connections from control box to control box and to other peripherals.
These rugged sockets are watertight (IP65) when used with the appropriate plugs and sealing rings. Each socket is equipped with
a plug holder clamp which, when locked, ensures the plug is completely pressed into the socket.
A
B
Image 7-1
A
Power output port.
B
Power input port.
C
Data output port.
D
Data input port.
E
Plug holder clamp.
W
ARNING
junction with Barco's outdoor cables for LED-walls. Do not use any other cables than those specified.
W
ARNING
control boxes and all plug holder clamps must be locked firmly.
W
ARNING
and data cables. Use the correct sealing ring for the corresponding socket. Black colored ring (B361243, left
image) for power, red (B361595, right image) for data. Replace damaged sealing rings immediately.
Overview
•
Power cabling of MiSPHERE control boxes
•
Data cabling of MiSPHERE control boxes
R5976941 MISPHERE 03/01/2006
C
D
:
The outdoor input and output sockets of the MiSPHERE control boxes can only be used in con-
:
Dummy plugs must be placed on unused outdoor input and output sockets of the MiSPHERE
:
Be sure that the connector sockets are provided with sealing rings before plugging in the power
E
7. Cabling of MiSPHERE control boxes
37
Advertisement
Table of Contents
