Fiberlink System - Barco MiSPHERE Installation Manual

4. MiSPHERE peripherals and accessories

4.4 Fiberlink system

General
The data signal coming out of the digitizer is transported from the digitizer to the display by a high-speed data link. To send such
a high density stream of data over long distances, a fiber optic cable is required. Barco offers a complete system: a transmitter, a
cable and a receiver.
Barco offers two different fiberlink systems: one for shorter distances, based on a multi mode optical fiber, and one for longer dis-
tances, based on a single mode optical fiber. Refer to the manual of the fiberlink system for more information about the fiberlink
system.
24 R5976941 MISPHERE 03/01/2006