8. Maintenance
8.1 Cleaning MiSPHERE units
Necessary tools
•
Soft brush.
•
Clean cloth.
•
End caps.
How to clean MiSPHERE units ?
1. Place an end cap upon the input and output socket of the MiSPHERE unit.
Tip:
You can clean a string of MiSPHERE units at once. Ensure that the input socket of the first unit and the output socket of
the last unit are sealed up with an end cap.
2. Clean the outside of the MiSPHERE unit(s) with a soft brush and some water.
Caution:
Do not submerge the MiSPHERE unit(s) into water or other liquids.
3. Wipe dry the MiSPHERE units using a clean cloth.
Always clean all MiSPHERE units of the system to avoid brightness differences between cleaned and un-
cleaned MiSPHERE units.
42
R5976941 MISPHERE 03/01/2006