Log In To The Configuration Home Page - CyberData 011307 Operation Manual

Singlewire informacast indoor intercom with keypad
Hide thumbs Also See for 011307:
Table of Contents

Advertisement

2.4.4 Log in to the Configuration Home Page

1. Open your browser to the Intercom IP address.
Note
Note
Note
Note
2. When prompted, use the following default Web Access Username and Web Access
Operations Guide
If the network does not have access to a DHCP server, the device will default to an IP
address of 10.10.10.10.
Make sure that the PC is on the same IP network as the Intercom.
You may also download CyberData's VoIP Discovery Utility program which allows you to
easily find and configure the default web address of the CyberData VoIP products. 
CyberData's VoIP Discovery Utility program is available at the following website address:
https://www.cyberdata.net/pages/discovery
The Intercom ships in DHCP mode. To get to the Home page, use the discovery utility to
scan for the device on the network and open your browser from there.
Password to access the Home Page
Web Access Username: admin
Web Access Password: admin
Installing the Singlewire InformaCast Indoor Intercom with Keypad
(Figure
2-21):
931640A
Log in to the Configuration Home Page
CyberData Corporation
30

Advertisement

Table of Contents
loading

Table of Contents