Configuring The Vmebus Interface - Motorola MVME2400 Series Installation And Use Manual

Configuring the VMEbus Interface

ENV asks the following series of questions to set up the VMEbus interface
for the MVME240x modules. To perform this configuration, you should
have a working knowledge of the Universe ASIC as described in your
MVME2400 Series VME Processor Module Programmer's Reference
Guide.
VME3PCI Master Master Enable [Y/N] = Y?
PCI Slave Image 0 Control = 00000000?
The configured value is written into the LSI0_CTL register of the
Universe chip.
PCI Slave Image 0 Base Address Register = 00000000?
The configured value is written into the LSI0_BS register of the
Universe chip.
PCI Slave Image 0 Bound Address Register = 00000000?
The configured value is written into the LSI0_BD register of the
Universe chip.
PCI Slave Image 0 Translation Offset = 00000000?
The configured value is written into the LSI0_TO register of the
Universe chip.
PCI Slave Image 1 Control = C0820000?
The configured value is written into the LSI1_CTL register of the
Universe chip.
PCI Slave Image 1 Base Address Register = 01000000?
The configured value is written into the LSI1_BS register of the
Universe chip.
http://www.motorola.com/computer/literature
Set up and enable the VMEbus Interface. (Default)
Y
Do not set up or enable the VMEbus Interface.
N
ENV – Set Environment
6-13
6