Overview Of Start-Up Procedures; Table 1-2. Start-Up Overview - Motorola MVME2400 Series Installation And Use Manual

Hardware Preparation and Installation
1

Overview of Start-Up Procedures

What you need to do...
Unpack the hardware.
Set jumpers on the MVME240x
module.
Prepare the PMCs.
Prepare the PMCspan module(s).
Prepare any other optional
devices or equipment you'll be
using.
Install the PMCs on the
MVME240x module.
Install the primary PMCspan
module (if used).
Install the secondary PMCspan
module (if used) (Cont'd).
1-4
The following table lists the things you will need to do before you can use
this board, and tells where to find the information you need to perform
each step. Read this chapter in its entirety along with all Caution and
Warning notes before beginning.

Table 1-2. Start-Up Overview

Refer to...
Unpacking Instructions on page 1-6
Hardware Configuration on page 1-6
PMC Preparation on page 1-11
For additional information on PMCs, refer to the PMC
manuals provided with these cards.
PMCspan Preparation on page 1-11
For additional information on PMCspan, refer to the
PMCspan PMC Adapter Carrier Module Installation
and Use manual, listed in
Documentation.
For more information on optional devices and
equipment, refer to the documentation provided with
that equipment.
PMC Module Installation on page 1-12
PMC Slots on page 2-7
For additional information on PMCs, refer to the PMC
manuals provided with these cards.
Primary PMCspan Installation on page 1-14
For additional information on PMCspan, refer to the
PMCspan PMC Adapter Carrier Module Installation
and Use manual, listed in
Documentation.
Secondary PMCspan Installation on page 1-17
For additional information on PMCspan, refer to the
PMCspan PMC Adapter Carrier Module Installation
and Use manual, listed in
Documentation.
Computer Group Literature Center Web Site
Appendix D, Related
Appendix D, Related
Appendix D, Related