Motorola MVME2400 Series Installation And Use Manual page 108

Environment Modification
6
6-6
NVRAM Bootlist (GEV.fw-boot-path) Boot Enable [Y/N] = N?
Y
N
Note When enabled, the GEV (Global Environment Variable) boot
takes priority over all other boots, including Autoboot and
Network Boot.
NVRAM Bootlist (GEV.fw-boot-path) Boot at power-up only [Y/N] = N?
Y
N
NVRAM Bootlist (GEV.fw-boot-path) Boot Abort Delay = 5?
The time in seconds that a boot from the NVRAM boot list will delay
before starting the boot. The purpose for the delay is to allow you the
option of stopping the boot by use of the
is from 0-255 seconds. (Default = 5 seconds)
Auto Boot Enable [Y/N]
Y
N
Auto Boot at power-up only [Y/N] = N?
Y
N
Give boot priority to devices defined in the fw-boot-
path global environment variable (GEV).
Do not give boot priority to devices listed in the fw-
boot-path GEV. (Default)
Give boot priority to devices defined in the fw-boot-
path GEV at power-up reset only.
Give power-up boot priority to devices listed in the
fw-boot-path GEV at any reset. (Default)
BREAK
= N?
The Autoboot function is enabled.
The Autoboot function is disabled. (Default)
Autoboot is attempted at power-up reset only.
Autoboot is attempted at any reset. (Default)
Computer Group Literature Center Web Site
key. The time value