Universe II (VMEbus to PCI) Chip
4
Functional Description
Architectural Overview
This section introduces the general architecture of the Universe II. This
description makes reference to the functional block diagram provided in
Figure 4-1
PCI bus, there are three functionally distinct modules: master module,
slave module, and interrupt module. These modules are connected to the
different functional channels operating in the Universe II. These channels
are:
The Architectural Overview is organized into the following sections:
4-2
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
– BLT, ADOH, RMW, LOCK
Automatic initialization for slave-only applications
Flexible register set, programmable from both the PCI bus and
VMEbus ports
Full VMEbus system controller functionality
IEEE 1149.1 JTAG testability support, and
Available in 313-pin Plastic BGA and 324-pin contact Ceramic
BGA
that follows. Notice that for each of the interfaces, VMEbus and
VME Slave Channel
PCI Bus Slave Channel
DMA Channel
Interrupt Channel
Register Channel
VMEbus Interface
PCI Bus Interface
Computer Group Literature Center Web Site