Motorola MVME2400 Series Installation And Use Manual page 25

What you need to do...
Install the MVME240x module
in a chassis.
Connect a console terminal.
Connect any other optional
devices or equipment you will be
using.
Power up the system.
Examine the environmental
parameters and make any
changes needed.
Program the MVME240x
module and PMCs as needed for
your applications.
http://www.motorola.com/computer/literature
Table 1-2. Start-Up Overview (Continued)
MVME240x Installation on page 1-20
System Considerations on page 1-22
DEBUG Port on page 2-5
Appendix B, Connector Pin Assignments
For more information on optional devices and
equipment, refer to the documentation provided with
that equipment.
Applying Power on page 2-1
Front Panel Indicators (DS1 – DS4) on page 2-4
If any problems occur, refer to
page 5-11.
You may also wish to obtain the PPCBug Diagnostics
Manual, listed in
Documentation.
ENV – Set Environment on page 6-3
You may also wish to obtain the PPCBug Firmware
Package User's Manual, listed in
Related
MVME2400 Base Board Preparation on page 1-7
Chapter 4, Programming Details
For additional information on PMCs, refer to the PMC
manuals provided with these cards.
You may also wish to obtain the MVME2400 Series
VME Processor Module Programmer's Reference
Guide, listed in
Overview of Start-Up Procedures
Refer to...
Diagnostic Tests on
Appendix D, Related
Documentation.
Appendix D, Related
Appendix D,
Documentation.
1-5
1