Appendix A Specifications; Specifications; Table A-1. Specifications - Motorola MVME2400 Series Installation And Use Manual

Specifications

The following table lists the general specifications for the MVME240x
VME processor module. The later sections provide information on cooling
requirements and EMC regulatory compliance.
Specifications for the optional PMCs can be found in the documentation
for those modules.
Characteristics
MPU
Memory
TOD clock device
Timers
Power requirements,
with no PMCs installed
(See Note)
Operating temperature
Storage temperature
ASpecifications

Table A-1. Specifications

MPC750 @
233 MHz
MPC750 @
350 MHz
MPC750 @
450 MHz
SDRAM
Flash
M48T559
One watchdog timer; time-out generates reset
Four real-time 16-bit programmable timers
+12Vdc, 0mA
–12Vdc, 0mA
(typical)
0° C to 55° C entry air with forced-air cooling (refer to
Requirements)
–40° C to +85° C
Specifications
16KB/16KB I/D on-chip cache
32KB/32KB I/D on-chip cache
32KB/32KB I/D on-chip cache
32MB, 64MB, or 128MB
ECC-protected
1MB via two 32-pin PLCC sockets
8MB via surface mount
8KB NVRAM
+5Vdc (±5%), 4A typical, 4.75A maximum
with MP603
+5Vdc (±5%), 4.5A typical, 5.5A maximum
with MP604
A
Cooling
A-1