Diagnostic Tests
The PPCBug hardware diagnostics are intended for testing and
troubleshooting the MVME240x module.
In order to use the diagnostics, you must switch to the diagnostic directory.
You may switch between directories by using the SD (Switch Directories)
command. You may view a list of the commands in the directory that you
are currently in by using the HE (Help) command.
If you are in the debugger directory, the debugger prompt
displays, and all of the debugger commands are available. Diagnostics
commands cannot be entered at the
PPC4-Bug>
If you are in the diagnostic directory, the diagnostic prompt
displays, and all of the debugger and diagnostic commands are available.
PPCBug's diagnostic test groups are listed in the
all tests are performed on the MVME240x. Using the HE command, you
can list the diagnostic routines available in each test group. Refer to the
PPCBug Diagnostics Manual for complete descriptions of the diagnostic
routines and instructions on how to invoke them.
http://www.motorola.com/computer/literature
prompt.
Using PPCBug
PPC4-Bug>
PPC4-Diag>
Table
5-2. Note that not
5-11
5